Electrical Training Course Schedule

The Electricity Forum Training Institute has conducted electrical onsite training courses for some of North America’s largest companies over the last 29 years.

We offer electrical onsite training courses that are tailored to meet your company’s specific requirements and conducted on your own premises. Our instructors will work with you in advance to determine the level of electrical training required, the current experience levels of your employees, as well as the specific applications that you would like covered.

Our electrical onsite training courses provide exception value as they are delivered using the equipment your electrical technicians use each day. This will maximize the educational value of your electrical training investment.

EFTI will provide you with FREE, no-obligation consultation, to assist you to meet your training requirements. For more information on how the Electricity Forum Training Institute can deliver any of these electrical on-site electrical training courses at your location, Contact Us Today

UPCOMING 2018 Electricity Forum Training Courses
 
  • December 12-13 , 2018 | Winnipeg, MB
  • January 14-15 , 2019 | Edmonton, AB
  • January 16-17 , 2019 | Richmond, BC

Much of today's infrastructure such as hospitals, data centres, industrial facilities and commercial buildings cannot withstand a loss of electrical power.  As a result, g PROGRAM DETAILS

 

Refresh your knowledge of the industrial and utility system protection techniques including fault analysis and overvoltage assessment. Develop your own relay settings and thoroughl PROGRAM DETAILS

 
  • January 21, 2019 | Richmond, BC
  • January 22, 2019 | Edmonton, AB
  • January 23, 2019 | Saskatoon, SK
  • January 24, 2019 | Winnipeg, MB
  • January 25, 2019 | Mississauga, ON
  • May 20, 2019 | Saskatoon, SK
  • May 22, 2019 | Winnipeg, MB
  • May 27, 2019 | Edmonton, AB
  • May 29, 2019 | Richmond, BC
  • June 3, 2019 | Mississauga, ON

CSA Z-462 2018 Edition As of January 2018 - Important Changes That You Should Know About.Electrical energy when harnessed and properly utilized can do significant amounts of work a PROGRAM DETAILS

 
  • February 5-6 , 2019 | Saskatoon, SK
  • February 7-8 , 2019 | Winnipeg, MB
  • February 11-12 , 2019 | Mississauga, ON
  • February 19-20 , 2019 | Edmonton, AB
  • February 21-22 , 2019 | Calgary, AB
  • February 25-26 , 2019 | Richmond, BC

Electricity Forums Training Institute’s (EFTI) Fire Alarm Training Course qualifies for four (4) hours of CFAA Technician Renewal Credits (Category 5 Course), as per the CFAA PROGRAM DETAILS

 
  • February 5, 2019 | Winnipeg, MB
  • February 7, 2019 | Saskatoon, SK
  • February 11, 2019 | Edmonton, AB
  • February 13, 2019 | Richmond, BC
  • February 27, 2019 | Mississauga, ON

Across Canada, building owners are adding solar panels to their roofs in order to save electricity and to reduce their utility bills. They are choosing to use their own solar PROGRAM DETAILS

 
  • February 5-6 , 2019 | Winnipeg, MB
  • February 7-8 , 2019 | Saskatoon, SK
  • February 11-12 , 2019 | Edmonton, AB
  • February 13-14 , 2019 | Richmond, BC
  • February 27-28 , 2019 | Mississauga, ON

THIS ONE DAY COURSE IS INTENDED FOR THOSE LOOKING TO GAIN CE CODE KNOWLEDGE ON SOLAR SYSTEMS, FROM THE PHOTOVOLTAIC ARRAY, THROUGH THE INVERTER TO USABLE POWER. DESIGNED FOR ENGINE PROGRAM DETAILS

 
  • February 6, 2019 | Winnipeg, MB
  • February 8, 2019 | Saskatoon, SK
  • February 12, 2019 | Edmonton, AB
  • February 14, 2019 | Richmond, BC
  • February 28, 2019 | Mississauga, ON

Hazardous (classified) locations, as defined in the "CE Code," are locations where fire or explosion hazards may exist due to the presence of flammable gases, flammable-l PROGRAM DETAILS

 
  • February 25-26 , 2019 | Mississauga, ON
  • February 28-1 March,2019 | Richmond, BC
  •  
  •  
  •  
  •  

Much of today's infrastructure such as hospitals, data centers, industrial facilities and commercial and multi residential buildings have antiquated building automation systems PROGRAM DETAILS

 
  • March 5-6 , 2019 | Winnipeg, MB
  • March 7-8 , 2019 | Mississauga, ON
  • March 11-12 , 2019 | Edmonton, AB
  • March 13-14 , 2019 | Richmond, BC

This Grounding and Bonding.Training course is founded on the CECode and is designed to give you the correct information you need to design, install and maintain effective electrica PROGRAM DETAILS

 
  • March 25-26 , 2019 | Mississauga, ON
  • April 8-9 , 2019 | Richmond, BC
  •  
  •  
  •  
  •  

The deployment of distributed generation technologies is creating a paradigm shift of the way energy is produced, traded, distributed, and utilized. Although such shift is unparall PROGRAM DETAILS

 
  • March 25-28 , 2019 | Mississauga, ON
  • April 8-11 , 2019 | Richmond, BC
  •  
  •  
  •  
  •  

This 4-Day Smart Distribution Network course combines our 2-Day Distribution Automation course WITH a 2-day Distribution Networks Analysis Workshop Using CYMDIST, which provides st PROGRAM DETAILS

 
  • March 27-28 , 2019 | Mississauga, ON
  • April 10-11 , 2019 | Richmond, BC
  •  
  •  
  •  
  •  

The deployment of distributed generation, energy storage, and electric vehicle charging technologies is creating a paradigm shift of the way distribution networks are planned, oper PROGRAM DETAILS

 
  • April 1-2 , 2019 | Richmond, BC
  • April 3-4 , 2019 | Edmonton, AB
  • April 8-9 , 2019 | Winnipeg, MB
  • April 10-11 , 2019 | Mississauga, ON

In recent years, electric utilities have embraced substation automation as much as any T&D automation technology. A recent research report found that 84 per cent of utilties ha PROGRAM DETAILS

 
  • April 30-1 May,2019 | Edmonton, AB
  • May 2-3 , 2019 | Calgary, AB
  • May 7-8 , 2019 | Saskatoon, SK
  • May 9-10 , 2019 | Winnipeg, MB
  • May 13-14 , 2019 | Mississauga, ON
  • May 15-16 , 2019 | Richmond, BC

This two day course will highlight the proper installation of Variable Frequency Drives. VFDs are being installed more frequently today; however there are still several installatio PROGRAM DETAILS

 
  • June 3-4 , 2019 | Richmond, BC
  • June 5-6 , 2019 | Edmonton, AB
  • June 10-11 , 2019 | Winnipeg, MB
  • June 12-13 , 2019 | Mississauga, ON

The course will benefit personnel of all levels of experience because it covers a range of complexity of relay schemes, methods of testing relays and of analyzing relay operations. PROGRAM DETAILS

Search EF TRAINING COURSES

On-Site Training Available

We can present this Course to your electrical engineering and maintenance staff, on your premises, tailored to your specific equipment and requirements. We are ready to help design this program for you. Click on the link below to request a FREE quotation.

Content Community Connection
Top