Electricity Forum Product Showcase

The MOV-1, Megaohm Validator, was designed to fit a particular need frequently experienced by those needing to make high resistance measurements. Many of these measurements are performed in the field using devices such as installation testers where ambient conditions can cause the user to question the validity of the measurement results. When the reading is questionable, is there a fault with the measurement device of the item being measured? The Megaohm Validator will quickly provide the user a method to test their measurement device in it's test leads on-site under the same, sometimes more harsh, ambient conditions. This device provides 6 high voltage capable resistance values (1M to 10G) with the accuracy and stability required for both on-site and laboratory requirements.

The Megaohm Validator is a hand-held device, which provides a simple method of ensuring insulation resistance testers are operating properly. Designed to meet the needs of industry professionals, this compact instrument is housed in a protective case, which makes it resilient and portable. Measurements with insulation testers in high resistance ranges are difficult to interpret when problems exist in the unit under test. Polarization, moisture and poor insulation often result in erratic readings causing doubt in the measurement. The Megaohm Validator is recommended for DC measurements from 1 MΩ to 10GΩ. Verifying the tester and lead performance is absolutely vital to understanding the measurement. Using the MOV-1 takes the doubt out of your insulation resistance testing.

Please visit our website at: www.edl-inc.com for further information and PDF data sheets for downloading. Also remember to check out EDL standard products, calibration line, and special high temperature bore thru compression fittings. Please inquire for more details; sales representatives are here for you by contacting us direct at 1.800.342.5335 or emailing sales@edl-inc.com.

For more information, please visit : www.edl-inc.com