Electrical Engineering Training


Click Here For Your FREE On-Site Electrical Engineer Training Quotation
We Are Canada's Leader In Electrical Training More than 1,500 satisfied electrical professionals in the past year alone!
INTERESTED IN COST EFFECTIVE, PROFESSIONAL ON-SITE Electrical Engineering Training??
We can present these Electrical Engineering Training Courses to your electrical engineering staff, on your premises, tailored to your specific equipment and requirements. Randy Hurst, President, The Electricity Forum, is ready to help design this program for you.

Why Take These Courses??
Our Electrical Engineering Training Course is designed to help electric power system engineers understand basic industrial, commercial and insitutional power systems design and engineering principles, as well as how to properly protect their electric power systems and then how to conduct and then implement an effective arc flash study, to properly protect electrical workers and equipment.

Who Should Take These
Electrical Engineering
Training Courses??
These Electrical Engineering Training courses are designed for plant and design electrical engineers and plant supervisors, inspectors, regulators, safety officers, technicians, electricians, who are responsible for the reliable operation and maintenance of industrial, commercial and insitutional electric power distribution systems. Plant, facility, and corporate electrical engineers dealing with one or more company distribution systems and consulting and utility engineers dealing with clients' systems. Consultants, architect-engineers will also find this course very beneficial.

Learn and Earn Continuing Education Units (CEU
Taking all three courses together will give a Student a Certificate from the Canadian Electricity Forum in "Industrial Electrical Engineering" worth a total of 4.2 CEU credits. CEUs are granted by the Engineering Institute of Canada. One CEU is equivalent to 10 professional development hours of instruction.


Arc Flash/Short Circuit Study Electrical Engineering Training Course

This 2-day Arc Flash/Short Circuit Study Engineering Course will provide students with an in-depth review of short circuit analysis problems in industrial, commercial and institutional power systems and provide the means for solving such problems, and discusses the impact of short-circuit fault currents on equipment selection. The course also highlights the differences in the computational approaches recommended in IEEE and IEC standards. The Arc Flash/Short Circuit Study Electrical Engineering Course component of this Electrical Engineering course is designed to help power system engineers understand how to implement an arc flash study into industrial, commercial and institutional power systems. A commercially available software program for performing fault analysis will be used by the presenter to solve example problems.

Course Objectives
Upon completion of this course, the student will learn:
  • How current NFPA 70E standards apply to your facility
  • Standards for limits of approach explained
  • Safe installation and maintenance of electrical equipment
  • Arc Flash Protection and Labeling
  • Which employees must be trained
  • Safe electrical work practices
  • The use of personal protective equipment
  • Test equipment and insulated tools
  • How to establish and maintain compliance
  • Learn arc flash approach boundary calculation and more!

Click Here For Details on Our 2-Day Arc Flash/Short Circuit Study Electrical Engineering Training Course

Relay Coordination Training Course

Relay Coordination of various electrical equipment and apparatus requires a good understanding of phase and ground short circuit currents, detection, and safe clearing of the faulted equipment. This Relay Protection Coordination Study Course provides a practical and comprehensive description of the principles and concepts of analysis, application and operation of protection schemes for various power system elements such as feeders, transformers, motors, buses, generators, etc. The course starts with an overview of power system fundamentals, design and short circuit calculations which lead to the understanding of protection scheme requirements and their applications. Protection requirements for industrial plants, cogeneration, and interconnection with the utility power system are explained in detail. This course covers the subject of power system protection from a practical perspective, and includes important functional aspects such as testing and coordination of protection systems. This course is designed for individuals who are involved with industries and utilities which depend on proper system protection for operational efficiency and minimizing damage to equipment.

Course Objectives
Upon completion of this course, the student will learn:
  • Will reduce unnecessary downtime!
  • Provide recommended settings for adjustable trip circuit breakers and relays.
  • Will increase coordination (selectivity) between devices.
  • Identifiy deficiencies in system protection.
  • Will provide recommended solutions to help correct your problem areas.
  • Reviews and discusions on the use of system devices with respect to National Electric Code requirements, and appropriate ANSI/IEEE standards

Click Here For Details on Our 2-Day Relay Coordination Electrical Engineering Training Course

Industrial Power Systems Analysis Electrical Engineering Training Course

Industrial Power Systems need a good design. A proper functioning electric power distribution system is vital to safety, maintenance, troubleshooting and the efficient operation of a modern industrial plant. The power distribution system includes high voltage utility tie circuit breakers, main transformers, medium voltage switchgear, distribution transformers, motor control centers, electric motors, variable speed drives, etc. This course is designed to address all aspects of industrial power distribution systems, including system planning, equipment selection, specification and application, system grounding, protection and conformity with electrical code requirements, etc. Typical one-line and relaying diagrams will be discussed for various applications.

Course Objectives
Upon completion of this course, the student will learn:
  • Learn industrial power systems design principals, planning and analysis.
  • This course is designed for electrical power engineers to review, reinforce and refresh their knowledge of power system design, operation and troubleshooting.
  • Advance your knowledge and skills in system planning, equipment selection, specification and application. Learn and understand important aspects of power distribution system design steps.
  • Improve your knowledge of how to operate your industrial power system efficiently, securely and safely.

Click Here For Details on Our 2-Day Industrial Power Systems Analysis Electrical Engineering Training Course
Subscription

 
Training Courses

Low Voltage Arc Flash-Electrical Safety Training Workshop

  • September 9, 2014 - Mississauga, ON
  • September 11, 2014 - Winnipeg, MB
  • September 12, 2014 - Saskatoon, SK
  • September 15, 2014 - Edmonton, AB
  • September 17, 2014 - Richmond, BC

2-Day LV-HV Arc Flash Electrical Safety Workshop

  • September 9-10, 2014 - Mississauga, ON
  • September 15-16, 2014 - Edmonton, AB
  • September 17-18, 2014 - Richmond, BC

MV/HV Arc Flash/Electrical Safety Training Workshop

  • September 10, 2014 - Mississauga, ON
  • September 16, 2014 - Edmonton, AB
  • September 18, 2014 - Richmond, BC

Electrical Generators & Backup Emergency Power Systems

  • September 22-23, 2014 - St. Johns, NL
  • September 24-25, 2014 - Mississauga, ON
  • September 29-30, 2014 - Winnipeg, MB
  • October 1-2, 2014 - Edmonton, AB

Fire Alarm and Life Safety Systems

  • October 6-7, 2014 - Mississauga, ON
  • October 8-9, 2014 - Calgary, AB
  • October 14-15, 2014 - Richmond, BC
  • October 16-17, 2014 - Winnipeg, MB

Ontario Electrical Safety Code Training

  • October 9-10, 2014 - Mississauga, ON

Power System Design Engineering Course

  • October 14-15, 2014 - Mississauga, ON
  • October 16-17, 2014 - Edmonton, AB
  • October 20-21, 2014 - Richmond, BC

LV-MV Electrical Grounding for Industrial Power Systems

  • October 16-17, 2014 - Richmond, BC
  • October 20-21, 2014 - Edmonton, AB
  • October 27-28, 2014 - Mississauga, ON
  • November 3-4, 2014 - St. Johns, NL
  • November 17-18, 2014 - Saskatoon, SK
  • November 19-20, 2014 - Winnipeg, MB

Edmonton Electrical Grounding Week

  • October 20-24, 2014 - Edmonton, AB

High Voltage Electrical Grounding

  • October 22, 2014 - Edmonton, AB
  • October 29, 2014 - Mississauga, ON
  • November 5, 2014 - St. Johns, NL

Electrical Grounding For Oil & Gas Applications

  • October 23-24, 2014 - Edmonton, AB
  • November 6-7, 2014 - St. Johns, NL

Toronto Electrical Grounding Week

  • October 27-31, 2014 - Mississauga, ON

Edmonton Electric Motor Week

  • October 27-31, 2014 - Edmonton, AB

Industrial Electric Motor Management

  • October 27-28, 2014 - Edmonton, AB
  • November 17-18, 2014 - Mississauga, ON

VFD and Electric Motor Control Training

  • October 29-30, 2014 - Edmonton, AB
  • November 19-20, 2014 - Mississauga, ON

Telecommunications Electrical Grounding and Bonding

  • October 30-31, 2014 - Mississauga, ON

Industrial Electric Motor Testing

  • October 31, 2014 - Edmonton, AB
  • November 21, 2014 - Mississauga, ON

St. Johns Electrical Grounding Week

  • November 3-7, 2014 - St. Johns, NL

Power System Protection Engineering Course

  • November 13-14, 2014 - Mississauga, ON
  • November 17-18, 2014 - Richmond, BC
  • November 19-20, 2014 - Edmonton, AB

Toronto Electric Motor Week

  • November 17-21, 2014 - Mississauga, ON

Power System Modeling and Calculations Engineering Course

  • December 4-5, 2014 - Mississauga, ON
  • December 8-9, 2014 - Richmond, BC
  • December 10-11, 2014 - Edmonton, AB
 
Advertisement
 
Affiliates
 
Featured Product

Large Stocking Distributor Specializing in Instrument Transformers and Metering Components

Spectrum Industries, Inc.
Spectrum Industries is an Instrument Transformer electrical distributor and contract manufacturer located in Peabody, Massachusetts.
more...

A Note About Commercial Content

Don't be fooled by other training experiences available in the marketplace presented by manufacturers and service companies, where electrical safety information sessions are really intended to sell equipment and services. The Electricity Forum strives to present technical, non-commercial training that benefits the student - all you receive is credible, commercially-unbiased education. The Electricity Forum does not endorse or promote any company's products or services. We respect that your time and money are invested in your education.

Registration Procedure

Canadian Electricity Forum
215-1885 Clements Road
Pickering, ON L1W 3V4
Call our Registration Department at
(905) 686-1040

Fax your completed form to Registration Services at
(905) 686-1078

Register online



A letter of confirmation will be sent to you once the registration form is processed.

Cancellation and Refund Policy

Registration fees are refundable only upon receipt of written notification 10 days prior to the conference date, less a 10 per cent service charge. Substitution of participants is permissible.
The Electricity Forum reserves the right to cancel any conference it deems necessary and will, in such event, make a full refund of the registration fees.

For more information click here

About the Electricity Forum

With headquarters in Pickering, Ontario, The Electricity Forum is dedicated to providing cost-effective, highly specialized education and learning through industry-wide forums, electrical training courses, Electricity Today magazine, and a comprehensive website at www.electricityforum.com. Since 1986, more than 25,000 delegates from leading companies across North America have attended our forums and courses.
Sign Up Today and Receive Our FREE E- Newsletter

E-newsletter service - Exciting industry trends, technical developments, product information, forums and electrical training courses.