NEW 2008 CATALOGUE

techniCAL is pleased to announce the release of the 2008 Test & Measurement Guide providing information on Multimeters, Clamp-on Meters, Electrical Testers, Calibrators, Thermometers, Hygrometers, Tachometers, Pressure Meters, Air Velocity Meters, Light and Sound Meters, and Specialty Products.

This 74 page FREE Catalogue includes an additional 12 page Product Feature section, promoting new products from best-of-breed manufacturers:

  • AEMC Instruments

  • BETA Calibrators

  • Comark, A FLUKE Company

  • Conzerv Systems

  • Kaymont Industries

  • Martel Electronics

  • MTECH

  • PPM Instruments

  • Prime Technologies 

  • Sensorlink Corp.

  • Transmille

  • Vaisala 

 

CLICK HERE

to request a FREE Catalogue.

 

  		 

 

 Clamp-on Data Logger Model CL601
 Model 8230
The Simple Logger® II Model CL601 is a battery powered, one channel recording device with an alkaline battery pack. Line tracking is performed such that 64 samples over one line cycle are taken. Frequency tracking is performed over the range of ±2Hz around the nominal line frequency (50 or 60Hz). Harmonic measurements are calculated from these 64 samples.


The Simple Logger® II records TRMS at a rate of up to eight times per second. The measurement process is performed no more than eight times per second. TRMS calculations are performed on a single line cycle. This means that the input(s) are ignored between measurement intervals.
The main advantage of the logger is its ability to perform a variety of recording tasks with easy and intuitive setup from a computer using DataView® software.

 

10A Micro-Ohmmeter Model 6240

Model 6470The 10A Micro-Ohmmeter Model 6240 is a rugged, low resistance tester designed for both plant maintenance and field use. Utilizing a four-lead Kelvin method of testing, the Model 6240 Micro-Ohmmeter accurately measures very low resistance within 0.25%.

Resistance measurements are automatically calculated from 1µΩ to 400Ω with resolutions down to 1µΩ. The Model 6240 has selectable test currents of 10A, 1A, 100mA and 10mA and includes a polarity reversal function.

The Model 6240 is designed to conduct tests on both resistive and inductive material. Up to 99 measurements can be stored and printed directly to a printer or from a PC.

The DataView® Software included allows you to configure the instrument, temperature compensate the test results, as well as, store data and print reports.  
 

 

 

 

 Dual Source Energy Meter EM6438

Two Energy Registers U and G separately record consumption based on a Control Signal for Dual Source billing.